Spray units

HEMO A22

The HEMO A22 spray unit is for spraying of putty, plaster and other filler materials with a particle size of up to 3 mm. HEMO A22 allows differently structured spray-puttying and can also be sued for simple puttying and for making self-levelling floors. To properly spray materials, the spray unit must have compressed air at 400-600 l/min. and 3-6 bar. The device has an air pressure adjuster to maintain the necessary pressure.
The HEMO A22 spray unit pumps materials with its screw pump. The HEMO A22-2S model can pump at two different operating speeds. The HEMO A22-SM model has a frequency converter that smoothly regulates the pump output.

Keywords:

putty and plaster, compressed air is needed, screw pump

The HEMO A22-SM device can be conveniently used to make differently structured putty surfaces. HEMO A22 is equipped with the A22-400 spray gun. The device has a remote control cable and switch. The device starts and stops when the remote control switch (24 V) is pressed. The spray unit has a bag wringer of fibreglass-plastic for emptying of putty bags. Due to the large rubber wheels the spray unit can be conveniently moved around during construction work.

Keywords:

putty and plaster, compressed air is needed, screw pump