Spray units » Spray unit with screw pump SPR-6SM
SPR-6SM spray unit is designed for premixed spray application of plaster and coatings with filler grain up to 2 mm. SPR-6SM has the frequency inverter, by using this is simple to change the capacity of the pump. It is very comfortable to make surfaces of different texture with SPR-6SM. To spray the materials, there is needed compressed air 400-600 l/min at 4-6 bar. The chassis of the spray unit is made from stainless steel. The spray unit is equipped with the bag emptier.
Technical specification
Motor
|
230 V, 3 phases |
Motor capacity |
1,1 kW |
Electr. requirement |
230V single-phase or 110V single-phase |
| Fuse |
16 A or 25 A |
| Speed |
steppless |
| Capacity |
3-8 l/min (5-13 kg/min) |
| |
|
| Pump |
- N13S plus |
| Lenght |
- 1200 mm |
| Height |
|
| Width |
- 560 mm |
| Weight |
- 60 kg |
| Volume of the container |
- 50 l |
| Material hose |
- 25 mm (1") |
| Air hose |
- 10 mm |
| Standard hose |
- 10 m |
| Air requirement |
- 400-600 l/min 4-6 at bar |
Nozzles |
- 5, 7 mm |
| Bag emptier |
- reinforced glassfibre |
« Spray units |
